Nowadays, there are more and more types of bearings, and these bearings look no different in appearance, but. In fact, the characteristics and application range of these bearings are different. If there are errors in the use process, the consequences will be unimaginable. Cylindrical roller bearing and deep groove ball bearing are two kinds of bearings we often use. What are the differences between cylindrical roller bearing and deep groove ball bearing? Let's introduce it in detail.

The main differences between cylindrical roller bearing and deep groove ball bearing are as follows:

1.Rotating speed is different: because the contact of the rolling bodies of the two bearings is different, the rotating speed between them is also different. The larger the contact surface, the slower the rotating speed will be. The rotor of the cylindrical roller bearing is cylindrical, and the contact surface is relatively large, while the contact surface of the deep groove ball bearing is spherical, and the contact surface is relatively small. Therefore, by comparison, the deep groove bearing with its own spherical rolling body has certain advantages in rotating speed.

2.Noise difference: the same as the explanation of the speed, we also consider the impact of the contact surface on the noise. When the speed is the same, the contact surface of the cylindrical roller bearing will be larger than that of the deep groove ball bearing, the friction area will be larger, and the friction will also be affected. Therefore, the noise of the cylindrical roller bearing is larger than that of the deep groove bearing.

3.Different bearing capacity: the contact surfaces of spherical and cylindrical rolling bodies are different. Because the spherical contact surface is a point and the cylindrical contact surface is a line, under the same size, the deep groove ball bearing has a higher limit speed, a relatively large axial load bearing capacity, and a relatively small radial load bearing capacity; The limit speed of cylindrical roller bearing is not as high as that of deep groove ball bearing, and it can not bear axial load basically, but the bearing capacity of radial load is relatively large.

The above is some introduction about the difference between cylindrical roller bearing and deep groove ball bearing. Zhihua is a manufacturer of cylindrical roller bearing. We have rich experience in producing and selling cylindrical roller bearings. At present, the cylindrical roller bearings we produce are not only of good quality but also relatively cheap. If you need them, welcome to consult!