Drawn cup roller clutch is a kind of clutch that is separated when the operating device pulls the clutch outward. The drawn cup roller clutches play a role when the vehicle starts and shifts gears. At this time, there is a speed difference between the first and second shafts of the gearbox. The synchronizer can keep the speed of the first shaft synchronized with that of the second shaft only after the power of the engine is cut off from the first shaft. So what are the advantages of the drawn cup roller clutches over the ordinary clutch? Here's a detailed introduction!

Compared with push type diaphragm clutch, drawn cup roller clutch has the following advantages:

1.The structure is more simplified. The drawn cup roller clutch has a simpler and more compact structure, fewer parts and lighter weight because it cancels all support parts of the clutch and uses only one (or no) support ring.

2.The torque capacity is larger. Because the diaphragm spring of the drawn cup roller clutch presses against the pressure plate in the middle rather than the big end, a diaphragm spring with a larger diameter can be used in the same pressure plate size, thus improving the compression force and torque capacity without increasing the separation control force.

3.The separation efficiency is higher. In order to improve the separation efficiency, when ensuring a certain pressure plate lift, the separation stroke of the release bearing, that is, the separation empty stroke, should be reduced. Since the release finger of the pull clutch must be embedded in a special release bearing assembly, there is no free stroke between the release bearing and the release finger, which can improve the separation efficiency.

4.Pedal operation is more convenient. Firstly, the lever ratio of pull clutch is greater than that of drawn cup roller clutch. Secondly, because the drawn cup roller clutch has no intermediate support, so many friction pairs and friction losses are reduced, and the transmission efficiency is high, the pedal force of the drawn cup roller clutch is much lower than that of the push diaphragm clutch.

The above is about the advantages of the drawn cup roller clutch. Zhihua is a drawn cup roller clutches manufacturer from china. We have many years of experience in producing and selling the drawn cup roller clutch. At present, the drawn cup roller clutch we produce is not only of good quality but also relatively cheap. If necessary, welcome to consult!