SL,RSL type full complement cylindrical roller bearing
Full complement cylindrical roller bearings without an outer ring have solid inner rings and rib-guided cylindrical rollers. The inner rings are produced with two rigid ribs. Since these bearings have the largest possible number of rolling elements, they have extremely high radial load carrying capacity, high rigidity and are suitable for particularly compact designs. Due to the kinematic conditions, however, they do not achieve the high speeds that are possible when using cylindrical roller bearings with cage. The bearings are available as single row and double row locating bearings. They can support not only high radial forces but also axial forces in both directions and can therefore guide shafts axially in both directions. The bearings are supplied in an open design. They are not greased and can be lubricated with oil or grease. The rolling elements are protected against damage and loss during transport by means of a plastic sleeve. The further information on cylindrical roller bearings in Catalogue HR 1, Rolling Bearings must be observed