DRAWN CUP ROLLER CLUTCHES
INCH SERIES
• For proper application, separate bearings are suggested (adjacent to clutch) to carry radial loads and assure concentricity between shaft and housing.
• The clutch engages when housing is rotated relative to the shaft in direction of arrow marking (← LOCK), as labeled on cup.
• Proper inspection requires use of ring gage and bore plug gage(s).
• Shaft raceway and housing bore diameters that are necessary for proper mounting and operation are listed on the opposite page.
• Clutch have spring integrally molded (type RC) stainless steel springs inserted (type RC-FS) in molded cage to position rollers for lockup.
The mounted clutch engages when the housing is rotated relative to the shaft in the direction of the arrow marking
(← LOCK) stamped on the cup.
(1) Suffi x “-FS” is not always stamped on the clutch cup. Type RC-FS with stainless steel springs is always readily identifi ed by RED clutch cage.
(2) See pages B-112 to B-119 for other suitable bearing types and sizes.